Today I rebuilt the fork tubes. Really, I just put new seals in after cleaning out the internals the other day. I still need to send the fork lowers out to be powder coated, which Dave will take care of, so there really wasn't anything to be gained by installing the seals right now, but it was something to do. Actually, I will just deliver all of these pieces to him since the lowers need some care since the drain plugs/screws are missing now thanks to me misplacing them. I probably threw them away by accident.

The fork lowers use 2 seals stacked on top of each other on each side.

The photo on the right is the correct orientation of the seals. Install one, then install the other right on top of it.